Printing Thickner for Disperse, Reactive, Vat, Indigosol type of dyes on Polyster, Cotton, Nylon or their blends.

Introduction:
This is Hydrolysed Gum developed for polyester & Blended Fabrics. It is highly modified Guar based Gum. It is developed for printing of on Rotary, Flat-Bed and Roller type Machines.

Physico Chemical Properties

KEVIPOL AGBV
Appearance: Free flowing crystalline powder.
Colour: Yellowish powder.
PH : 8.5 to 9.5
% of Mosture at Packing : 8 to 10% (Maximum)
% Concentration : 8to 10%
Viscosity: 35000 CPS in 7% SOLN
Ash Content : 7 to 8%
Residue content : Less than 0.25 % in 200 mesh bolting cloth.

Method of Testing
PH: It is measured in 1% soln after stirring for 15 minutes.
Viscosity: In a 500 ml water add 40 gms powder with stirring for 30 minutes. Keep it for 15 minutes then cool down to 30C & measure viscosoty of that paste. (RV type Viscometer with spindle No. 4 at 2.5 RPM).
Residue content: Take 20 gms of Gum and dissolve into 500 ml & keep for one hour. Filter the above solultion with 200 mesh filter using aspilator or vaccum suction ( wall of filter also to be washed ) Then, dry the filter 50-60 C.